TM1000/07 automatic spray coating machine reciprocating lame plating polymer emulsion flat coater

Introduction

TM1000/07 Miniature Flat Film Applicator (reciprocating lame plating), effective area 160 × 80mm (can be expanded to 200 × 100mm), small body, size about A4 paper size, can be placed in a standard ventilated kitchen. Its powerful function, can accurately lame plating in a small area, supports multiple cycles; with programmable control, lame plating speed, discharge, drying and pause time can be adjusted, Vacuum chuck fixed substrate to ensure lame plating flat. Motion, lame plating and Control system work together, and parameter presetting and real-time monitoring are realized by PLC and Touchscreen. 7-Inch Touchscreen embedded on the side, easy to operate

core function

• Small area precision lame plating (16 × 8cm), supports multiple cycles of lame plating.

• Programmable control:

  Lame plating speed, discharge amount adjustable

  Drying time and pause time can be set freely (support second-level adjustment)

• Vacuum chuck fixed substrate, ensure lame plating flat.

subsystem composition

Motion system - rodless cylinder to push the spray gun back and forth (manually adjust the traverse speed).

Lame plating system - precision plunger pump + pneumatic atomization spray gun (supports Flow rate/pressure adjustment).

Control system - PLC + Touchscreen, supports parameter preset and real-time monitoring.

Structural layout

Overall size

Length × width × height: 300mm × 240mm × 200mm (about A4 paper size, can be put into

Standard ventilated kitchen; this height does not include gun rack, with rack about 400mm).

Space Allocation

Upper layer: spray gun moving guide (covering 16 × 8cm lame plating area).

Middle layer: substrate adsorption platform (with vacuum interface).

Lower layer: control box + pump body + solenoid valve.

human-machine interaction

The side is embedded with a 7-inch Touchscreen, which is convenient for parameter setting and monitoring.

Technical parameters