CP225-A inks color display instrument, plastic printing Proofer

HuiNuo Intelligent CP225-A inks Color Proofer is a high-efficiency plywood printing Proofer with multi-stage color development function, which can print multiple Color or thickness color bars at the same time to achieve fast and accurate Color contrast. It can detect inks Hue, Gloss, color concentration, predict dry and wet ink changes, reduce ink waste and reduce costs. Easy to operate, easy to clean, precision and durable equipment, it is a good choice to improve printing quality and efficiency.

Function introduction

1. Spot Color proofing multi-stage color development instrument can simultaneously print different Color strips or printing different ink thickness of the same inks color strips, can also print new and old ink on the same printing material for comparison, providing efficient Color contrast.

2. Process Color inks detection can detect Hue, Gloss and color concentration of inks; start with controlling the mass of inks raw materials, so as to achieve the purpose of controlling the mass of printing products.

3. For customers to pre-press Spot Color approval can make a simple color bar for customers to pre-press approval or archive.

4. Detect the degree of dry and wet ink discoloration. The Spot Color inks color bar required by the color display machine can be known after drying naturally. (For example, the phenomenon that purple and dark blue will turn red after drying can be ruled out before printing.)

5. When used with inks Basis Weight meter, the usage of Spot Color inks can be predicted, and the residual ink loss and warehouse accumulation can be greatly reduced.

6. Data management with spectrophotometer for color detection, measurement of color bar data report (Lab value).

7. With related instruments, it can predict the characteristics of inks Abrasion Resistance, fading, metastasis and light resistance and heat resistance.

Technical parameters

Comparison of INKS Color Developer Solution and Traditional Spot Color Processing

Contents Traditional processing Spot Color method inks color development instrument solution method inspection Spot Color Hue manual color development is difficult and has large errors. After the printing press is applied, it needs to be debugged repeatedly, which consumes a lot of printing equipment production time, materials, etc. Some materials are even more incapable of manual color development Simulation printing press to make color strips, fast, accurate and easy to check, does not require printing press time, only a small amount of materials, and low trial printing cost. The influence of wet and dry ink changes on Hue is on the printing press table. Wait for inks to dry for too long, and it is difficult to control and solve. It can be used to print color strips before printing, compare them naturally after drying, and eliminate them in advance. There are different paper quality, Hue difference; when the quantity is small, the book is difficult, long time, expensive and other unfavorable factors. Color bars can be printed on the paper to be produced to eliminate differences.

Equipment features

1. Automatic ink leveling (ink leveling pressure, time, speed can be adjusted);

2. Color development speed and pressure can be adjusted.

3. Multi-stage color roll structure, which can simultaneously develop 4 color bars (inks of different thicknesses or different hues);

4. With the use of Basis Weight Instrument, it can precisely control the thickness of the ink layer of the color strip, and it is very convenient to make a color scheme system database;

5. Easy to operate and clean.

6. The instrument is precise and durable.